Wing Center Trailing Edge
Build Hours: 901
We have completed the center section trailing edges. The trailing edge ribs were cut according to the plans but had to be adjusted to fit our rear spars by about 3/32"
Next, the required pattern was made for the trailing edge skins.We have completed the center section trailing edges. The trailing edge ribs were cut according to the plans but had to be adjusted to fit our rear spars by about 3/32"
These are the original cuts we made to finish the inside edges. Later, more material had to be removed to allow the bottom trim to lay as flat as possible. The trailing edge, trim and fuselage do not lay in the same plane.
The installed trailing edges.
No comments:
Post a Comment